Preparation of Porous Cordierite with Thermally Stable Pore Structure

A cordierite ceramic with a thermally stable pore structure was prepared by a simple modification of a sol-gel reaction of alkoxide precursors, synthesized from Mg metal or Mg acetate, Al(i-OPr)₃, and partially prehydrolyzed Si(OEt)₄. For aging and drying, wet cordierite gel was treated with water vapor at 150°C to strengthen the gel network through enhanced hydrolysis and condensation reactions. The cordierite xerogels showed BET surface areas between 220–410 m²/g, depending on the catalyst and treatment conditions used. In particular, water vapor treated xerogel displayed comparatively thermally stable pore characteristics, which exhibited only a 4–17% decrease in BET surface area up to 700°C, while samples prepared using the conventional sol-gel method showed a 55–91% reduction. Both the DTA and XRD patterns showed that crystallization began at 900°C leading to the -Cordierite phase and the subsequent phase transition to -cordierite at temperatures between 1050 to 1250°C.     

Novel thermally stable polyimides based on flexible diamine: synthesis, characterization, and properties

A novel diamine with built-in sulfone, ether, and amide structure was prepared via three-step reactions. Nucleophilic reaction of 4-aminophenol with 4-nitrobenzoyl chloride in the presence of propylene oxide led to preparation of N-(4-hydroxy phenyl)-4-nitrobenzamide (HPNB). The nitro group of this compound was reduced with hydrazine and Pd/C to afford 4-amino-N-(4-hydroxy phenyl)benzamide (AHPB). Two moles of AHPB were reacted with bis-(4-chloro phenyl)sulfone to provide a novel sulfone ether amide diamine (SEAD). All the prepared compounds were characterized by common spectroscopic methods. The prepared diamine (SEAD) used to prepare related polyimides by reaction with different aromatic dianhydrides. The obtained poly(sulfone ether amide imide)s were characterized and their properties were studied.     

共沉淀法和模板法制备均匀负载CeO2/ SiO2的研究

CeO2是三效催化剂(简称TWC)中被广泛应用的涂层材料[1],其优良的储放氧能力(OSC)可以扩大TWC的工作窗口,并可以在与γ-Al2O3的相互作用中提高Al2O3的高温稳定性[2]。在高温下,CeO2会因晶粒迅速长大而失去储放氧能力。为了提高CeO2的高温抗烧结能力,以及进一步提高其氧化还原能力,大部分研究者选择了在CeO2晶格中掺入其他离子的方法,如:Zr4 、Pr3 、La3 等[3￣5],这些离子在CeO2晶格中引入了晶格缺陷,不但稳定了结构,而且提高了氧传输能力。SiO2具有很高的化学稳定性、高比表面及高热稳定性,是载体的理想选择。研究表明,CeO2负载…     

Recyclization of 1,3,4-Oxadiazoles and Bis-1,3,4-oxadiazoles into 1,2,4-Triazole Derivatives. Synthesis of 5-Unsubstituted 1,2,4-Triazoles

Efficient methods have been developed for obtaining precursors of stable carbenes, viz. 5-unsubstituted 3,4-diaryl-1,2,4-triazoles and 3,3′- or 4,4′-bridge linked bis-1,2,4-triazoles, by the recyclization of 5-unsubstituted 1,3,4-oxadiazoles or p-phenylenebis-1,3,4-oxadiazole with anilines or aromatic diamines in the presence of trifluoroacetic acid or with aniline hydrochlorides in pyridine. __________ Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 7, pp. 1026–1032, July, 2005.     

Novel processable aromatic thermoplastic polyimides: Films,adhesives, moldings,and graphite composites

Novel hot-melt type flexible, tough, thermally stable, processable, thermoplastic, aromatic polyimides have been synthesized involving reaction of a keto-ether containing diamine with hinged aromatic dianhydrides followed by thermal and chemical cyclodehydration. Inherent viscosity in DMAC at 35°C of the synthesized polymers ranged 1.02 to 1.4 dl/g (0.5% solution). The polymers showed a glass transition temperature (T_g) of 250°C to 180°C as determined by differential scanning calorimetry (DSC) and thermomechanical analysis (TMA). Thermogravimetric analysis showed polymer stability up to 510°C, in both air and nitrogen atmospheres. All the polymers have shown good melt-flow. Films of 1.5–2.8 ml thickness were made and tested for mechanical properties at room temperature, 177°C and 210°C. The developed films are suitable for adhesion of Ti/Ti specimens and showed a lap shear strength of 5575 psi. Melt-fusion of the polymers gave tough moldings. Graphite cloth composites have been made and tested for mechanical properties.     

Polyethers derived from bisphenols and highly fluorinated aromatics

A series of fluorinated aromatic polyethers was synthesized via aromatic nucleophilic substitution of highly fluorinated aromatics (1,2,4,5-tetrafluorobenzene, hexafluorobenzene, and decafluorobiphenyl) with bisphenol AF or bisphenol A. Polymerization with 1,2,4,5-tetrafluorobenzene was not observed, and polymerization of hexafluorobenzene with bisphenol proceeded only if the potassium carbonate–bisphenol ratio was carefully controlled. The polymer condensed from decafluorobiphenyl and bisphenol AF was prepared in 77% yield with an inherent viscosity of 1.01 dL/g. The polymer prepared from the condensation of decafluorobiphenyl with bisphenol A was obtained in 48% yield with an inherent viscosity of 0.28 dL/g. These polymers were very soluble in common organic solvents, formed clear, colorless films, and were thermally stable (> 450°C by TGA). The fully fluorinated polymer exhibited low water uptake (0.3%) and dielectric constant (2.17). © 1992 John Wiley & Sons, Inc.     

温度与碱浓度对FeO_4~(2-)/FeO_2~-体系电化学行为的影响

研究了影响Fe(OH)3进行酸式电离反应的因素,在多种浓度和温度条件下的NaOH浓溶液中采用SnO2-Sb2O3/Ti电极,研究FeO42-/FeO2-体系的电化学氧化还原反应参数及其变化趋势,结果证实该体系发生电化学氧化还原反应的最佳碱溶液浓度范围为12~14 mol/L,最佳温度范围为295~315 K.阐明了在实验条件下FeO42-/FeO2-氧化还原体系中存在由FeO43-/FeO2-构成的氧化还原电对,而FeO42-不直接与FeO2-构成氧化还原电对;并给出了FeO42-/FeO2-氧化还原体系的Latim er图.     

Some remarks on multivariate stable distributions

This paper deals with multivariate stable distributions. Press has given an explicit algebraic representation of characteristic functions of such distributions [J. Multivariate Analysis2 (1972), 444–462]. We present counter-examples and correct proofs of some of the statements of Press. The properties of multivariate stable distributions, connected with the spectral measure Γ, present in the expression of the characteristic function, are studied.     

The theory of ordered spans of unrestricted random walks

The spans of ann-step random walk on a simple cubic lattice are the sides of the smallest rectangular box, with sides parallel to the coordinate axes, that contains the random walk. Daniels first developed the theory in outline and derived results for the simple random walk on a line. We show that the development of a more general asymptotic theory is facilitated by introducing the spectral representation of step probabilities. This allows us to consider the probability density for spans of random walks in which all moments of single steps may be infinite. The theory can also be extended to continuous-time random walks. We also show that the use of Abelian summation simplifies calculation of the moments. In particular we derive expressions for the span distributions of random walks (in one dimension) with single step transition probabilities of the formP(j) 1/j ¹⁺, where 0<<2. We also derive results for continuous-time random walks in which the expected time between steps may be infinite.     

Symmetric Stable Processes on Unbounded Domains

Let be a symmetric -stable process in , , . We give necessary and sufficient condition under which the expectation of a very general function of the exit time from horns is finite. These domains include the symmetric domains given by increasing functions studied earlier by various authors. Our methods differ from those in earlier papers in that we obtain our results from estimates on the transition densities instead of harmonic measure. Some of this estimates are of independent interest.Supported in part by NSF grant #9700585-DMS and RTN Harmonic Analysis and Related Problems contract HPRN-CT-2001-00273-HARP.